Need help?Do you have a question about the Teka LSI3 1300E and is the answer not in the manual?
Important guidelines for safe appliance operation and maintenance.
Ensuring proper earthing of the electrical installation.
Caution about high water temperatures during washing cycles.
Specific actions to avoid during appliance use, like using adapters or touching with wet feet.
Ensuring children are supervised and do not play with the appliance.
Positioning the machine near its final location without packaging.
Steps to remove central screw, lateral screws, and cross piece.
Connecting the fill hose to the water tap.
Hooking the outlet tube to the edge of the bath or a fixed outlet.
Adjusting the machine's feet for proper levelling.
Diagram and labels for all control panel buttons and indicators.
How to start, pause, and resume a wash cycle.
How to set a delayed start time for wash cycles.
Selecting drying programmes and time.
How to select programmes and turn the machine on/off.
Details on programmes for cotton, linen, and hemp.
Programmes for mixed textiles, synthetics, and cotton blends.
Programmes for delicate fabrics like wool and synthetics.
Exclusive Teka programme for mixed fabrics at 40°C, saving energy.
Tips for efficient energy and water use by loading the machine fully.
How to prepare for drying by selecting a high spin speed.
How the machine adapts water level to load size for efficiency.
Steps to select programmes and start the machine.
Warning about the maximum load (3kg) for automatic cycles.
Steps to prepare for automatic wash/dry cycles.
Steps for selecting drying programmes and time.
Recommending the cool down phase for fabric care.
Causes and solutions for the machine not starting any programme.
Causes and solutions for the machine not loading water.
Causes and solutions for water not draining from the machine.
Troubleshooting water leaks around the appliance.
Causes and solutions for the machine not spinning.
Troubleshooting vibrations during the spin cycle.
Solutions for when no programme starts.
Solutions for when the machine does not load water.
Solutions for when water is not discharged.
Solutions for water leaks around the machine.
Solutions for when the machine does not spin.
Solutions for excessive vibrations during spin.
To Next Page
General
