14 / 29 EN
Refrigerator / User Guide
Installation
3. Remove the water filter by-pass cover by
pulling.
C
A few drops of water may flow out
after removing the cover; this is
normal.
4. Place the water filter cover into the
mechanism and push to lock in place.
5. Push the “Ice” button on the screen again to
cancel the “Ice Off” mode.
C
The water filter will clear certain foreign
particles in the water. It will not clear the
microorganisms in the water.
C
See section 5.2 for activating the filter
replacing period.
To Next Page
Loading...
