12
The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance
forces the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.This
cuts down on frost build-up inside the appliance.
Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and c
lose the door as soon as possible.
Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
Spare enough space for convenient opening of the doors and drawers or
statement by the distributor.
1078mm
700mm
m6221
m
6
mm00
125°
2.4 Changing the Light (Optional)
2.6 Energy saving tips
2.5 Starting
Light source in this product is replaceable only by qualified engineers.
1. Please take out the
plug before removal.
3. Take down the lamp
panel.
4. Remove the connection
terminal.
2. Remove the lampshade with
a screwdriver.
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer,its service agent or similar
qualified person.
Before initial start, keep the refrigerator still for two hours before
connecting it to power supply.
To Next Page
