1.
First, open any of the outlet valves at the outlet of the water heater, then,
open the inlet valve. The electric water heater begins to be filled with
water. When there is water coming out of the outlet valve normally, it
implies that the heater has been fully filled with water, and the outlet valve
can be closed.
(Fig.5)
Pressure relief valve
Water inlet valve
Pressure relief valve
Water inlet valve
Water inlet valve
Running water pipe
Running water pipeMixing valve
Mixing valve
Water pool
Water pool
Triple joint
Triple joint
Shower nozzle
Water inlet valve
Shower nozzle
Hot
water
outlet
Hot
water
outlet
Cold
water
inlet
Cold
water
inlet
Power cord
Power cord
5
To Next Page
