1、Thermostat
2、Drawer
3、Leveler leg
UNPACKING YOUR FREEZER
WARNING: Use two or more people to move Freezer.
Failure to do so can result in back or other injury.
·Remove tape and any labels from your Freezer before using(except
the rating label).
·To remove any remaining tape or glue, rub the area briskly with your
thumb.
·Tape or glue residue can also be easily removed by rubbing a small
amount of liquid dish soap over the adhesive with your fingers.
Wipe with warm water and dry.
·Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can
damage the surface of your Freezer.
·When moving the Freezer, do not tilt the Freezer beyond 45°from
upright position.
CLEANING BEFORE USE：
After you remove all of the packaging materials, （especially the
foam between outside condenser and cabinet should be removed）
clean the inside of your Freezer before using it.
SPACE REQUIREMENTS
WARNING: Keep flammable materials and vapors, such as
To Next Page
Loading...
