TEKK Trainer - User Manual

To Next Page

1 Raise Tekk

Trainer leg up 90 degrees.

2 Lower support bracket.

3 Align support bracket with holes on post and insert the locking pin into support bracket.

Support bracket locking pins should be inserted into the 5th hole from the lanyard

during rst time set-up. Repeat for the other side of the goal.

4 Raise Tekk

Trainer upright.

5 Insert locking pins into the top corner brackets. (Locking pins should be inserted from the

front side of the Tekk

Trainer out through the back side of the Tekk

Trainer.)

Allen Key

Rebounder Tube

Trainer Frame

32 Large Bungees -

attached to frame

Congratulations on your new Tekk

Trainer! This assembly manual will guide you through the set-up

of your new Tekk

Trainer. Note: It is very important that you follow the instructions to ensure

a quick and easy set-up of your Tekk

Trainer.

Have fun! We here at Tekk

hope you will love practicing with your new Tekk

Trainer and enjoy using

the same equipment used by the pros.

4 Locking Pins

2 Stakes

Net

trainer

ASSEMBLY MANUAL

1 Place Trainer on the ground with Tekk

logos facing down.

2,3 Pull and swing Tekk

Trainer arms open.

(Top corners of Tekk

Trainer should look like #4, NOT #5)

1 2 3

A Unfold Tekk

Trainer Frame

Parts:

B Raise Tekk

Trainer Legs & Lock

1 2 3

Locking Pin

4 5

Need help?

Do you have a question about the TEKK Trainer and is the answer not in the manual?

Summary

Unfold Tekk Trainer Frame

Place Trainer on Ground

Place the Tekk® Trainer on the ground with the Tekk® logos facing down.

Open Trainer Arms

Pull and swing the Tekk® Trainer arms open, ensuring top corners resemble a specific configuration.

Raise Tekk Trainer Legs & Lock

Raise Leg to 90 Degrees

Raise one leg of the Tekk® Trainer to a 90-degree angle.

Lower Support Bracket

Insert Locking Pin

Align support bracket with post holes and insert the locking pin.

Raise Trainer Upright

Secure Top Corner Brackets

Insert locking pins into the top corner brackets from the front through to the back.

Attach Rebounder Tube to Frame

Unfold Rebounder Tube

Unfold the rebounder tube before attaching it to the frame.

Position Rebounder Tube Pin

Attach Skid Bracket to Pin

Place the hole on the skid bracket onto the pin of the rebounder tube.

Attach Net to Frame

Identify Double Loop Bungee

Attach Top Corner Loops

Attach Bottom Left Corner Loop

Attach Bottom Right Bungee

Attach Bungees to Net

Attach Bungees to Bottom Tube

Attach Bungees to Top Tube

Attach Bungees to Side Tubes