EasyManua.ls Logo

Tekmar Boiler Control 265 - View Menu Items; Outdoor and Boiler Temperature Readings; Boiler Modulation and Running Hours

Tekmar Boiler Control 265
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2010 D 265 - 07/10 28 of 36
Outdoor Current outdoor air temperature as measured by the outdoor
sensor. This item is only available when the External Input / Stand
Alone DIP switch is set to Stand Alone.
-76 to 149°F
(-60 to 65°C)
Boiler Supply Current boiler supply water temperature as measured
by the boiler supply sensor.
-22 to 266°F
(-30 to 130°C)
Boiler Target Boiler target temperature is the temperature the con-
trol is currently trying to maintain at the boiler supply sensor.
– – –
, 35 to 230°F
(
– – –
, 2 to 110°C)
Boiler Return Current boiler return water temperature as measured
by the boiler return sensor.
A boiler return sensor must be installed to view this item.
-22 to 266°F
(-30 to 130°C)
Boiler ΔT The actual temperature difference between the boiler
supply and the boiler return sensors.
A boiler return sensor must be installed to view this item.
0 to 252°F
(0 to 140°C)
Boiler 1 Modulation Current percent modulation of the boiler’s
burner. This item is only available when Boiler 1 is set to Au
(automatic).
0 to 100%
Boiler 2 Modulation Current percent modulation of the boiler’s
burner. This item is only available when Boiler 2 is set to Au
(automatic) or CP1 (copy 1).
0 to 100%
Boiler 3 Modulation Current percent modulation of the boiler’s burner.
This item is only available when Boiler 3 is set to Au (Automatic) or
CP1 (copy 1) and DHW MODE is set to OFF.
0 to 100%
A
Boiler 1 Hours The total running time of boiler 1 since this item
was last cleared. To clear this item, press the and button
simultaneously while viewing this item.
This item is only available when Boiler 1 is set to Au (automatic).
0 to 1999 hr
A
Boiler 2 Hours The total running time of boiler 2 since this item
was last cleared. To clear this item, press the and button
simultaneously while viewing this item.
This item is only available when Boiler 2 is set to Au (automatic) or CP1.
0 to 1999 hr
A
Boiler 3 Hours The total running time of boiler 3 since this item
was last cleared. To clear this item, press the and button
simultaneously while viewing this item.
This item is only available when Boiler 3 is set to Au (automatic) or
CP1 and DHW MODE is set to OFF.
0 to 1999 hr
Display
Description
Range
Section
Installer
Adv
View Menu (1 of 1)

Related product manuals