Version 2024 9
11 | Operation and storage conditions
Operating/room temperature
Storage / transport temperature
12 | Noise emissions
Measurement in accordance with EN ISO 19085-1:2021 annex F:
Measurement conditions / additional information according to EN ISO 19085-1:2021, appendix F
with ISO 11202 for the emission noise pressure with accuracy level 3
and ISO 3744 for the acoustic power with accuracy level 3
A-weighted emission sound pressure level L
pA
in dB at workplace
Uncertainty K
WA
/ K
PA
in dB
If the stated noise emission values are to be checked, then the measurements must be taken following the same
procedure and in the same operating and installation conditions as described.
WARNING: The noise emission values stated are only valid, when the same operating- and installation conditions
apply. Other operation and installation conditions, e.g. a different work process, can lead to higher noise emission
values with the danger of underestimation.
WARNING: The noise emission values stated are not exposure level values. Although there is a correlation between
emission and exposure levels, the emission values can not be used to reliably determine whether increased safety
measures are required. Factors that influence the actual degree of exposure are the actual work process, the
exposure time, the characteristics of the workplace and other neighbouring noise sources in the workshop.