Amazon IPC-3 and IPC-5 power supplies deliver stiff, responsive
75 VDC power to Eclipse, Meridian, and ClearPath servo systems.
These DSP-based supplies feature tight power regulation and high
peak output to support high performance motion control. And, with
a small footprint and attractive pricing, the IPC saves on space,
weight, and machine cost as well.
IPC-3 / IPC-5 Features
Front Panel Mating Components
75 VDC output with tight regulation, even with large peak
loads.
Dual AC input voltage ranges: 95-125VAC; 190-250VAC.
High peak output relative to continuous rating (2.5x),
optimized for servo drive peak demand requirements.
Rapid output bus discharge upon AC power removal.
Built-in, automatic regenerated power management.
Large output capacitance for reduced ripple and
increased efficiency.
Fan mounting holes provided for increased continuous
power (IPC-5 only).
IPC-5 is fully enclosed; IPC-3 is open frame.
Three year warranty.
DC Output
Connectors
AC Input
Connector
Housing: Molex/44441-2002
Terminals: Molex/43375-0001
Crimp Tool: Molex/63811-7200
Cable:
14-16AWG, 600V, stranded
Mating Components List
Housing: Molex/39-01-2080
Terminals: Molex/39-00-0039
Crimp Tool: Molex/638190900
Cable:
18AWG, 300V, stranded
Mating Components List
WIRE ENTRY VIEW
WIRE ENTRY VIEW
5 1
6 2
7 3
8 4
DC Bus (V+)
DC Bus (V-)
1
2
AC Input
Mating Connector
DC Output
Mating Connector
Note: No user serviceable parts inside
Install 18 AWG jumper
when wiring to 95-125VAC
Omit jumper
when wiring to 190-250 VAC
75 Volt Intelligent Power Center
PE GND
(pins 6 or 7)
AC Line
AC Line
Smart DC Power Supplies
Amazon IPC-3 and IPC-5
Information LED
See LED blink code
reference later in this
document for details.
Outputs 75VDC to your
servo drive, step drive,
or ClearPath motor.
Accepts standard 115 VAC
and 230 VAC (nominal)
voltage ranges.
Regen Indicator
See LED blink code
reference later in this
document for details.
Amazon IPC-5 Power Supply
To Next Page
Need help?
General
