Teknim TFP-1212 - User Manual

TFP-121x Series
Analogue Addressable Fire Alarm Control Panel
Installation & Operating Manual
Issue Date : 25/08/2017 Rev:00

Summary

Introduction to Teknim TFP-121 x Series Panels

General Panel Safety Warnings

Important safety instructions for handling the panel, including electrical hazards and grounding.

Installation and Operation Manual Warning

Critical warning to read and understand the manual before starting installation.

Technical Specifications of TFP-121 x Analogue Addressable System

Power Supply Specifications

TFP-121 x Analogue Addressable Fire Alarm System Overview

Panel Properties and Features

Lists key features like programmable zones, display, event memory, and protocols.

TFP-121 x Panel User Interface and Button Functions

Control Panel User Interface Layout

Identifies buttons and LEDs on the control panel.

User Interface Button Functionality

Explains the function of each button (TEST, BUZZER, MUTE, RESET, EVACUATE, navigation, ESC, OK).

Installation Guide for Teknim TFP-121 x Fire Panels

Panel Installation Procedure

Step-by-step instructions for mounting the panel securely.

Power Supply and Grounding Requirements

Details on mains voltage connection, grounding resistance, and cable type.

Battery Connection and Installation

Instructions for connecting the 12V sealed lead-acid batteries.

Inputs and Outputs

Network Card Connection

Instructions for installing the network card and enabling TdNET mode.

Panel Configuration and System Setup

Panel Activation Process

Steps to activate the panel and generate an activation code.

User Levels and Authorizations

Details on the four user levels (Level 1 to Level 4) and their permissions.

Level 3 User Access and Authorizations

Level 4 User Access for Advanced Operations

Configuring the Panel via Computer Software

TCP;IP Configuration for Network Communication

Panel-Based Configuration Settings

Default Panel Parameters

Panel Configuration Sequence

Setting Panel Clock and Date

Configuring Panel Parameters

Panel Address Configuration

Night;Day Mode Configuration

General Delay Setting

Setting Zone-Specific Delays

Adding New Devices to the System

Configuring Device Parameters

Device Zone Assignment

Device Labeling

Configuring Zone Parameters

Zone Labeling

Operating the Teknim TFP-121 x Fire Alarm Panel

Status Window Overview

Understanding the status window for Fire, Error, and Warning messages.

Fire Alarm List and Details

Accessing and viewing detailed information about fire alarms.

Error Window and Error Types

Warning Window and Warning Types

Event Log for System Activity Tracking

Disabling Panel Functions (Devices, Zones, Sirens, Loops)

Disabling Individual Devices

Steps to disable specific devices, making them inactive during fire situations.

Disabling Zones

Steps to disable entire zones, making devices within them inactive.

Disabling Siren Outputs

Disabling Loops

Performing Zone Testing

Loop Management Functions

Loop Control for Discontinuities

Locating discontinuities (open/short circuits) within a loop.

Adding Devices to the Loop

Deleting Devices from the Loop

Configuring Loop Parameters

TdNET Network Communication Functions

TdNET Map Configuration

TdNET Parameters Configuration

Configuring Incoming Commands in TdNET

Configuring Outgoing Commands in TdNET

User Management and Programming

Setting Service Reminders and Warnings

Maintenance, Repair, and Servicing Guidelines

General Maintenance and Repair Instructions

When to contact service, cleaning instructions, and warnings against self-repair.

User Maintenance and Diagnostics

Troubleshooting Loop Line Open Circuit Errors

Troubleshooting Device Missing Errors

Regular Inspection Procedures

Daily Panel Inspection

Weekly Fire Alarm System Testing

Appendix - EN 54 Standard Compliance and Optional Functions

Teknim TFP-1212 Specifications

General

Brand	Teknim
Model	TFP-1212
Category	Control Panel
Language	English