Tekno EB 410 - Bag A; Center Differential (overview)

TKR6517
TKR5144
Bag A
Center Dierential
(overview)
TKR6522
TKR6513X
TKR6550
TKR6550
TKR6515
TKR6511
*TKR6670
(Option)
TKR5144
TKR6517
TKR6515
Step
A-2
Step
A-4
Fill Level
Step
A-3
Step
A-1
TKR5144
Dierential 0-rings
x2
TKR6517
Dierential Shims (5x14mm)
x2
TKR1303
M2.5x10mm Flat Head Screw
x4
TKR1303 x4
TKR6550
TKR6513X
Di
Oil
TKR6522
*TKR6670
(Option)
TKR6514
TKR6514
TKR6514
TKR6514
TKR6517
TKR6550
TKR5144
TKR1303 x4
3
Grease
Grease
Grease
Grease
Fill with #15,000 oil to
1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: These screws
only need to be snug.
Do not over-tighten
or the internal gears
will bind up.
Note: Apply grease to the
groove where the o-ring is
placed as well as the o-ring itself.
TKR6514
TKR6514
Note: Gears will feel a bit tight at first. Please
run 3-4 packs on the track for break-in
before evaluating the internal gear mesh.
Once broken in, it is advised to rebuild each di
with fresh oil. Once complete, the dis will be
smooth and race ready.