Kona Micro Quick Start Guide T0005281_QS Version 0.2
TEKTELIC Communications Inc. Confidential Page 6 of 16
Follow the below diagram to setup Micro gateway. Make sure that the Ethernet cable,
and LoRa antenna are connected to their respective ports properly on the Gateway.
Figure 2: Gateway Setup
2. Install KonaFT on Windows laptop or PC. Copy the KonaFT self-extracting installer
software onto the computer then double-click on the installer icon to start the installation
process.
3. Register Gateway and Sensor on Network Server:
Register your Sensor (with OTAA) and Gateway on the Network Server. (Follow the
Tektelic Network Server Guide T0005281_NS.)
4. Apply power to the Gateway using the supplied AC-DC adapter:
To Next Page
Loading...
Need help?
General
