TEKTELIC Communications Kona Micro Gateway Series - User Manual

TEKTELIC COMMUNICATIONS INC.
Document type:
User Guide
Document number:
T0005281_UG
Document version:
1.2
Document Status:
Approved
Product name:
Kona Micro Gateway
Product codes:
See Table 1
TEKTELIC Communications Inc.
7657 10
th
Street NE
Calgary, AB, Canada T2E 8X2
Phone: (403) 338-6900
© 2019 TEKTELIC Communications Inc., All rights reserved.
All products, names and services are trademarks and registered trademarks of their respective companies.
Disclaimer:
Material contained in this document is subject to change without notice. The material herein is solely for
information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent
of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the
furnishing, performance or use of this material.
TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined
by TEKTELIC.

Summary

Product Description

Overview

Overview of the Kona Micro Gateway's LoRaWAN capabilities, backhaul options, and power.

Physical Interfaces

Details the connector layout, including DC power, Ethernet, and LoRa RF antenna ports.

Specifications

Lists key technical specifications such as dimensions, weight, operating temperature, and power input.

Installation

Installation Overview

General information and precautions for indoor installation of the Kona Micro Gateway.

Unpacking and Inspection

Procedure for inspecting the shipping carton and unpacking the gateway.

Gateway Mounting

Instructions for physically mounting the gateway using screws on a flat surface or wall.

DC Power Cable Connection

Steps for connecting the AC-DC power adapter and understanding its polarity.

Battery Installation Procedure

Procedure for installing the optional internal backup battery.

RF Cable Connection

Guidance on connecting the LoRa RF antenna, including torque specifications.

Ethernet Cable Connection

Requirements for connecting the Ethernet cable for commissioning or backhaul.

Proposition 65 Safety Warning

Warning regarding potential chemical exposure and where to find more information.

Radio Compliance Statements

TEKTELIC Communications Kona Micro Gateway Series Specifications