EasyManua.ls Logo

TEKTELIC Communications T0005127 - User Manual

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TEKTELIC COMMUNICATIONS INC.
Document type:
User Guide
Document number:
T0005281_UG
Document version:
1.2
Document Status:
Approved
Product name:
Kona Micro Gateway
Product codes:
See Table 1
TEKTELIC Communications Inc.
7657 10
th
Street NE
Calgary, AB, Canada T2E 8X2
Phone: (403) 338-6900
© 2019 TEKTELIC Communications Inc., All rights reserved.
All products, names and services are trademarks and registered trademarks of their respective companies.
Disclaimer:
Material contained in this document is subject to change without notice. The material herein is solely for
information purposes and does not represent a commitment by TEKTELIC or its representatives. TEKTELIC has
prepared the information contained in this document solely for use by its employees, agents, and customers.
Dissemination of this information and/or concepts to other parties is prohibited without the prior written consent
of TEKTELIC. In no event will TEKTELIC be liable for any incidental or consequential damage in connection with the
furnishing, performance or use of this material.
TEKTELIC reserves the right to revise this publication in accordance with formal change control procedures defined
by TEKTELIC.
Question and Answer IconNeed help?

Do you have a question about the TEKTELIC Communications T0005127 and is the answer not in the manual?

Summary

Product Description

Overview

Provides a general introduction to the Kona Micro Gateway features and capabilities, including supported LoRa WAN channels and backhaul options.

Physical Interfaces

Details the connector layout and types for the Kona Micro Gateway, including DC power, Ethernet, and LoRa RF antenna ports.

Specifications

Lists the technical specifications of the Kona Micro Gateway, covering dimensions, weight, operating temperature, and regulatory compliance.

Installation Guide

Installation Overview

General guidelines and precautions for installing the Kona Micro Gateway, emphasizing indoor use and adherence to electrical codes.

Unpacking and Inspection

Procedures for safely unpacking and inspecting the Kona Micro Gateway upon arrival, including reporting damage and retaining packaging.

Kona Micro Gateway Mounting

Instructions on how to mount the Kona Micro Gateway securely to a flat surface or wall using M3 screws.

DC Power Cable Installation

Details on connecting the supplied AC-DC power adapter to the Kona Micro Gateway, specifying voltage and connector type.

Battery Installation

Instructions for installing or replacing the internal backup battery for the gateway, including safety and disposal guidelines.

RF Cable Installation

Guidance on connecting the LoRa RF antenna to the gateway's reverse SMA connector, including torque specifications.

Copper Ethernet Cable Installation

Information on connecting the Ethernet cable for backhaul or commissioning, specifying conductor gauge and rating.

Proposition 65 Statement

Warning regarding potential exposure to chemicals from the product, as required by California law.

Radio Compliance Statements

Federal Communications Commission (FCC)

Details FCC compliance rules and conditions for the device operation, including interference and RF exposure limits.

Industry Canada Compliance

Details Industry Canada RSS standards and antenna approval information, including radiation exposure limits.

TEKTELIC Communications T0005127 Specifications

General IconGeneral
ModelT0005127
CategoryGateway
ManufacturerTEKTELIC Communications
Ethernet Ports1
Ethernet10/100 Mbps
GPSYes
Operating Temperature-40°C to +70°C
Ingress ProtectionIP67
ConnectivityEthernet, Cellular, Wi-Fi
Frequency Bands868 MHz, 915 MHz
Cellular ConnectivityOptional
Wi-FiOptional
Power Supply12V DC
LoRaWAN Protocol1.0.2

Related product manuals