Kona Micro Quick Start Guide T0005281_QS Version 0.2
TEKTELIC Communications Inc. Confidential Page 8 of 16
Figure 3: Start KonaFT
9. Verify 3G/4G Connectivity (on applicable modules only):
The Wireless Modem tab in KonaFT is only displayed on modules with a modem and
provides LTE modem information, Network provider information, APN information,
RF information, call statistics and IP address.
▪ Select the “Wireless Modem” tab and click “Poll Now” button in each section
▪ Verify a public IP is assigned in the top window
▪ Verify Session State is CONNECTED in the Home Network window
▪ Verify Call Status is CONNECTED in the Call Statistics window
▪ The APN setting of the modem can be viewed in the Active Profile Parameters
window
▪ Signal Strength (RSSI) of the cellular connection is displayed in the RF Information
window
Note: To change the APN setting from KonaFT see detailed instructions in the
application note [2]
To Next Page
Loading...
Need help?
General
