To Next PageTo Next Page
Need help?Do you have a question about the TekTone Tek-CARE160 and is the answer not in the manual?
Details the NC160 CE Module, its features, and connectivity options.
Describes NC415AV/NC404TS Master Stations, their interfaces, and capabilities.
Lists the step-by-step process for installing the Tek-CARE160 system.
Explains the two installation strategies: One-to-One and Custom.
Illustrates the physical connections for audio, data, and master bus ports.
Covers mounting options and DIP switch addressing for the CE Module.
Provides instructions for installing backup batteries in the CE Module.
Details data bus wiring specifications, cable types, and maximum distances.
Provides guidance on audio bus cabling, noise reduction, and installation.
Explains how to address room controllers and their default behaviors.
Describes how room controller address affects default behavior (single/duty station).
Details the default station connections for each point on a room controller.
Specifies wiring requirements for various Tek-CARE160 stations.
Details connection steps for IR160 Audio Stations to room controllers and audio bus.
Explains how to assign addresses to NC415AV/NC404TS Master Stations.
Details connecting the data bus wiring to the NC160 CE Module.
Provides instructions for connecting audio bus cables to the CE Module.
Explains how to connect master bus cabling to the CE Module ports.
Details connecting the programming laptop to the CE modules via Ethernet.
Guides on navigating and using the LS450 Config Tool for system programming.
Guides on performing a complete system test before autodetect configuration.
Details how to edit station names, types, and behaviors in the Config Tool.
Explains using the Edit Multiple window for batch station configuration.
Covers setting station behavior, virtual station exists, and applying changes.
Guides on renaming master stations and configuring call filters/zones.
Explains disabling unused points to optimize system performance.
Provides instructions for programming a system with custom wiring.
Guides on enabling and assigning points for stations in custom configurations.
Guides on changing default call types generated by system inputs.
General| Brand | TekTone |
|---|---|
| Model | Tek-CARE160 |
| Category | Conference System |
| Language | English |
