TekTone Tek-ENTRY TE903A - Worksheets; Programming Worksheet

To Next Page

To Previous Page

IL573 Tek-ENTRY

Telephone Entry System Phone-Line Version Manual • 13

Programming Worksheet ————————————————–

Building Address: ___________________________________________________________________________

___________________________________________________________________________

Date of Installation: ______________________ System Telephone Line #: _____________________

Installation Company: ___________________________________________________________________________

___________________________________________________________________________

Programming Instructions:

A. Enter “*” and the three-digit Master Code (see #3 below) on the keypad to access the programming menu.

B. Press the “1” key to scroll up, or press the “3” key to scroll down the menu screen to the desired function.

C. Press the “#” key to select the desired function when it is displayed on the screen.

D. Follow the displayed instructions to make the necessary changes.

E. Press the “*” key twice to end program mode.

Factory Default Programming:

Function Factory Default Programmed

1. Tenant Dial Codes Blank (4 digits) See Directory Worksheet

2. Keyless Entry Codes Blank (4 digits) See Directory Worksheet

3. Master Code * 1 2 3 * __ __ __

4. 7-, 10- or 11-Digit Programming 7 digits ______________________

5. Pulse or Tone Dialing DTMF (Tone) ______________________

6. Door Open Time 10 Seconds __ __ (0-99 sec)

7. Talk Time 60 Seconds __ __ (0–99 sec)

8. Night Service Disabled ______________________

9. Rotary Phones Disabled __ __ __

10. Guard Telephone Number Blank __ ( __ __ __ ) __ __ __ – __ __ __ __