Clear and Sanitize Procedures
Memory devices
The following tables list the volatile and nonvolatile memory devices in the instrument and listed options. Detailed
procedures to clear or sanitize these devices, if any, are shown following each table.
Terminology
The following terms are used in the tables in this section:
User data – Describes the type of information stored in the device. Refers to waveforms or other measurement data
representing signals connected to the instrument by users.
User settings – Describes the type of information stored in the device. Refers to instrument settings that can be
changed by the user.
Both – Describes the type of information stored in the device. It means that both user data and user settings are
stored in the device.
None – Describes the type of information stored in the device. It means that neither user data nor user settings
are stored in the device.
Directly – Describes how data is modified. It means that the user can modify the data.
Indirectly – Describes how data is modified. It means that the instrument system resources modify the data and that
the user cannot modify the data.
AWG5200 Series Declassification and Security Instructions 1
To Next Page
Loading...
