Tektronix DPO2014B Programmer's Manual

Commands Listed in Alphabetical Order
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:SETHold:SETTime <NR3>
SEARCH:SEARCH<x>:TRIGger: A:SETHold:SETTime?
Arguments
<NR3> specifies the setup time for setup and hold violation triggering.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold:CH<x>
Sets or returns the trigger search setup and hold lower threshold to d etermine
where to place a mark. Search<x> is the search numbe r, which is always 1.
CH<x> is the channel number.
Conditions
MSO oscilloscopes only.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:SETHold:THReshold:CH<x> <NR3>
SEARCH:SEARCH<x>:TRIGger: A:SETHold:THReshold:CH<x>?
Arguments
<NR3> is the lower threshold in volts.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:THReshold{:MATH|:MATH1}
Sets or returns the trigger search setup and hold lower threshold to d etermine
wheretoplaceamark.Where<x>isthesearchnumber,whichisalways1.
Conditions
MSO oscilloscopes only.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:SETHold:THReshold{:MATH|:MATH1}
<NR3>
SEARCH:SEARCH<x>:TRIGger: A:SETHold:THReshold{:MATH|:MATH1}?
Arguments
<NR3> is the lower threshold in volts.
2-280 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2014B Specifications

General

Brand	Tektronix
Model	DPO2014B
Category	Test Equipment
Language	English