Need help?Do you have a question about the Tektronix DPO2014B and is the answer not in the manual?
General| Brand | Tektronix |
|---|---|
| Model | DPO2014B |
| Category | Test Equipment |
| Language | English |
Precautions to prevent fire or personal injury when using the oscilloscope.
Warning against touching exposed connections and components when power is present.
Steps and checks required before the initial setup of the oscilloscope.
Operating parameters for the MSO2000B and DPO2000B series oscilloscopes.
Instructions for grounding the oscilloscope and the user for safety.
Connecting the oscilloscope to a computer using VISA drivers for data acquisition.
Procedures for setting up analog channels to acquire signals.
Automatically adjusting settings to display a stable waveform.
Procedures to modify acquisition mode, record length, and delay time.
Steps to configure the oscilloscope for serial or parallel bus triggering.
Fundamental concepts related to trigger events and modes.
Guide to selecting different trigger types available on the oscilloscope.
Detailed descriptions of various trigger types and their conditions.
Procedure for taking automatic measurements on waveforms.
List and descriptions of available automatic measurements.
Using on-screen markers for manual measurements.
Analyzing signals in the frequency domain using FFT.
Utilizing Wave Inspector for efficient work with long waveforms.
Marking locations of interest for waveform analysis.
Procedure for saving a graphical image of the oscilloscope screen.
Saving and recalling numeric waveform data.
Saving and recalling oscilloscope setup configurations.
Using TekSecure to erase oscilloscope memory contents.
To Next Page
