Tektronix Keithley 2260B Series Programming Manual

REMOTE CONTROL
21
Interface Configuration
USB Remote Interface ......................................................... 21

Configure GPIB Interface ................................................... 22
Configure Ethernet Connection ......................................... 23
USB Remote Control Function Check .............................. 25
W
eb Server Remote Control Function Check .................. 26
Socket Server Function Check ............................................ 26
USB Remote Interface
USB
configuration
PC side
connector
Type A, host
2260B side
connector
Rear panel Type B, slave
Speed
1.1/2.0 (full speed/high speed)
USB Class
CDC (communications device
class)
Panel operation
1. Connect the USB cable to the rear
panel USB B port.
2. Press the Function key to enter the
Normal configuration settings.
Page 9
Set the following USB settings:
F-22 = 2
Set the rear panel USB port to
USB-CDC.
All manuals and user guides at all-guides.com

Tektronix Keithley 2260B Series Specifications

General

Brand	Tektronix
Model	Keithley 2260B Series
Category	Power Supply
Language	English