Tektronix MSO2000B Series

Commands Listed in Alphabetical Order
MEASUrement:
INDICators? (Query Only)
Returns all measurement indicator parameters.
Group
Measurement
Syntax
MEASUrement:INDICators?
Examples
MEASUREMENT:INDICATORS? might return
MEASUREMENT:INDICATORS:STA TE MEAS1;NUMHORZ 0;NUMVERT 4;HORZ1
7.5E0;HORZ2 -3.400000095367E0;HORZ3 0.0E0;HORZ4 0.0E0;VERT1
-6.351123E-6;VERT2 -3.179753E-6;VER T3 -6.40943E-6;VERT4
-6.403E-6
MEASUrement:INDICators:HORZ<x>? (Query Only)
Returns the position of the specified horizontal measurement indicator <x>, where
<x> can be 1, 2, 3, or 4.
Group
Measurement
Syntax
MEASUrement:INDICators:HOR Z<x>?
Examples
MEASUREMENT:INDICATORS:HOR Z1? might return
MEASUREMENT:INDICATORS:HOR Z1 -2.0E-3 indicating that horizontal
indicator1 has a value of –2 mV.
MEASUrement:INDICators:NUMHORZ? (Query Only)
Returns the number of horizontal measurement indicators currently being
displayed.
Group
Measurement
Syntax
MEASUrement:INDICators:NUM HORZ?
Examples
MEASUREMENT:INDICATORS:NUM HORZ? might return
MEASUREMENT:INDICATORS:NUM HORZ 2 indicating that there are currently
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-195