Commands Listed in Alphabetical Order
MEASUrement:
INDICators:VERT<x>? (Query Only)
Returns the value of the specified vertical measurement indicator <x> from the
trigger point, where <x> can be 1, 2, 3, or 4. A n egative value means that the
indicator is
positioned earlier in the waveform record than the trigger point.
Group
Measurement
Syntax
MEASUrement:INDICators:VER T<x>?
Examples
MEASUREMENT:INDICATORS:VER T2? might return
MEASUREMENT:INDICATORS:VER T2 -3.724507E-6 indicating that the
second measurement indicator is positioned 3.72 μs before the trigger point.
MEASUrement:MEAS<x>? (Query Only)
Returns all measurement parameters for the specified active measurement <x>.
Group
Measurement
Syntax
MEASUrement:MEAS<x>?
MEASUrement:MEAS<x>:COUNt? (Query O nly)
Returns the number of values accumulated for this measurement since the last
statistical reset. Values may be ignored if they generated an error. Measurements
are specified by x, which ranges from 1 through 4.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:COUNt?
Examples
MEASUREMENT:MEAS3:COUNT? might return :MEASUREMENT:MEAS3:C OUNT
3247.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-197
To Next Page
Loading...
Need help?
General
