Tektronix MSO2000B Series Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
CH<x> specifies
a channel input as the clock source, where <x> = 1, 2, 3, or 4.
MATH specifies the ma th waveform as the clock source.
REF specifies the reference waveform as the clock source.
D<x> specifies the digital waveform as the clock source, where <x>=0–15
NONe specifies no clock source.
SEARCH:SE
ARCH<x>:TRIGger:A:LOGIc:INPut:D<x>
Sets or returns the waveform logic criteria for a trigger search. SEARCH<x> is the
search number and
D<x> is the digital channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:D<x> {HIGH|L OW|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:D<x>?
Arguments
HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a “don't care” condition.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH
Sets or returns the Boolean logic criteria for a logic trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:MATH {HIGH|L OW|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:MATH?
Arguments
HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a “don't care” condition.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-267

Tektronix MSO2000B Series Specifications

General

Analog Channels	2 or 4
Vertical Resolution	8 bits
Digital Channels	16
Waveform Capture Rate	5, 000 wfms/s
Display	7-inch WVGA (800 x 480) color TFT LCD
Trigger Types	Edge, Pulse Width, Logic, Video
Serial Bus Analysis	I2C, SPI, CAN, LIN, RS-232/422/485/UART
Probe Interface	TekVPI
Connectivity	USB 2.0
Power Supply	100 to 240 VAC
Dimensions	368 mm
Sample Rate	1 GS/s (2 GS/s with interleaving)
Record Length	1 M points (standard), up to 10 M points (optional)