Tektronix MSO2012B Programmer's Manual

Commands Listed in Alphabetical Order
BUS:B<x>:SPI
:BITOrder
Sets or returns the bit order for the specified SPI bus.
Conditions
This command requires a DPO2EMBD application module.
Group
Bus
Syntax
BUS:B<x>:SPI:BITOrder {LSB|MSB}
BUS:B<x>:SPI:BITOrder?
Arguments
LSB specifies least significant bit first
MSB specifies most significant bit first
Examples
BUS:B1:SPI:BITOrder LSB sets the bit order to LSB for the specified bus.
BUS:B1:SPI:BITOrder? might return BU S:B1:SPI:BITOrde r MSB
indicating that the returned bit order for the specifiedbusisMSB.
BUS:B<x>:SPI{:CLOCK|:SCLK}:POLARity
Sets or returns the SPI SCLK polarity for bus <x>, where x is the bus number.
Conditions
This command requires a DPO2EMBD application module.
Group
Bus
Syntax
BUS:B<x>:SPI{:CLOCK|:SCLK }:POLARity {FALL|RISe}
BUS:B<x>:SPI{:CLOCK|:SCLK }:POLARity?
Arguments
FALL specifies the falling edge.
RISe specifies the rising edge.
BUS:B<x>:SPI{:CLOCK|:SCLK}:SOUrce
Sets or returns the SPI SCLK source for bus <x>, where x is the bus number.
Conditions
This command requires a DPO2EMBD application module.
2-86 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English