Tektronix MSO2012B Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:LO
GIc:INPut? (Query Only)
Returns the logic input values for all channels. If a clock channel is defined,
it returns the clock source and edge.
Group
Trigger
Syntax
TRIGger:A:LOGIc:INPut?
Examples
TRIGGER:A:LOGIC:INPUT? might return :TRIGGER:A:LOGIC:INPUT:CH1
HIGH;CH2 X;CH3 X
indicating that a logic high is expected on channel 1 while
channel 2 and channel three are “don't care.”
TRIGger:A:LOGIc:INPut:CH<x>
Sets or returns the logical input condition for the channel specified by <x>.
Group
Trigger
Syntax
TRIGger:A:LOGIc:INPut:CH< x> {HIGH|LOW|X}
TRIGger:A:LOGIc:INPut:CH< x>?
Arguments
HIGH specifies the logic high.
LOW specifies the logic low.
X specifies a "don't car e" s tate.
Examples
TRIGGER:A:LOGIC:INPUT:CH1 ? might return :TRIGGER: LOGIC:INPUT:CH1
X
indicating that the setting for the A logic trigger input to channel 1 does not
matter.
TRIGGER:A:LOGIC:INPUT:CH2 HIGH sets the A logic trigger input to logic
HIGH for channel 2.
TRIGger:A:LOGIc:INPut:CLOCk:EDGE
Sets the polarity of the clock channel.
Group
Trigger
2-320 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English