Tektronix MSO2012B Programmer's Manual

Commands Listed in Alphabetical Order
WFMInpre:BYT
_Or
Sets or returns which byte of binary waveform data is expected first for incoming
waveform data when data points require than one byte. This specificationonlyhas
meaning when
WFMInpre:ENCdg is set to BIN and WFMInpre:BYT_Nr is 2.
Group
Waveform Transfer
Syntax
WFMInpre:BYT_Or {LSB|MSB}
WFMInpre:BYT_Or?
Related
Commands
WFMInpre:ENCdg, WFMInpre:BYT_Nr, WFMInpre:FILTERFreq
Arguments
LSB specifies that the least significant byte will be expected first.
MSB specifies that the m ost significant byte will be expected first.
Examples
WFMINPRE:BYT_OR MSB sets the most significant incoming byte o f incoming
waveform data to be expected first.
WFMINPRE:BYT_OR? might return :WFMINPRE :BYT_OR LSB indicating that the
least significant incoming CURVe data byte will be expected first.
WFMInpre:COMPosition
Sets and queries the type of waveform data to be transferred to the instrument with
the CURVe command.
Group
Waveform Transfer
Syntax
WFMInpre:COMPosition
{COMPOSITE_YT|COMPOSITE_EN V|SINGULAR_YT}
WFMInpre:COMPosition?
Related Commands
DATa:COMPosition
Arguments
COMPOSITE_YT uses the sample part of the composite waveform.
COMPOSITE_ENV uses the peak-detect part of the composite waveform.
SINGULAR_YT uses the sample part of the singular waveform.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-355

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English