To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Examples

WFMINPRE:FILT

ERFREQ?

might return :WFMINPRE:FILTERF REQ 200000000

indicating that the FilterVu frequency for the incoming waveform is 200 MHz.

WFMINPRE:FIL

TERFREQ 3000000000

sets the FilterVu frequency for the

incoming waveform to 300 MHz.

WFMInpre:NR_Pt

Sets or returns the number of data points that are in the incoming waveform record.

Group

Waveform Transfer

Syntax

WFMInpre:NR_Pt <NR1>

WFMInpre:NR_Pt?

Related Commands

CURVe, DATa, DATa:STARt, DATa:STOP, SAVe:WAVEform,

SAVe:WAVEform:FILEFormat, WFMOutpre:NR_Pt?

Arguments

<NR1> is the number o f data points if WFMInpre:PT_Fmt is set to Y. It is the

number of min-max pairs if WFMInpre:PT_Fmt is set to ENV.

Examples

WFMINPRE:NR_PT 10000 speciﬁes that 10000 data points will be expected.

WFMINPRE:NR_PT ? might return :WFMINPRE:NR_PT 10000 indicating that

there are 10000 data points in the expected incoming waveform record.

WFMInpre:PT_Fmt

Sets or returns the point format of the incoming waveform data. Regardless of

the argument used, the scale, o ffset, and so on are interpreted similarly. When

ENV is used, waveform data is interpreted over the min-max pair; when Y is

used, it is interpreted over a single point.

Group

aveform Transfer

Syntax

WFMInpre:PT_Fmt {ENV|Y}

WFMInpre:PT_Fmt?

Related Commands

WFMOutpre:PT_Fmt?

MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-357

Tektronix MSO2012B Programmer's Manual

Other manuals for Tektronix MSO2012B