Tektronix MSO2012B Programmer's Manual

Command Groups
Table 2-29: Save and Recall Commands (cont.)
Command
Description
SAVe:IMAGe:LAYout Sets or returns the layout to use for saved
screen images
SAVe:SETUp Saves the state of the oscilloscope to a
specified memory location or fi le
SAVe:WAVEform Saves a waveform to one of four reference
memory locations or a file
SAVe:WAVEform:FILEFormat Sets or returns the format for saved
waveforms
SAVe:WAVEform:GATIng Specifies whether save waveform operations
should save the entire waveform or a
specified portion of the waveform
SAVe:WAVEform:SPREADSheet:
RESOlution
Specifies whether to save the full (LRL) or
reduced (thumb) resolution waveform to a
CSV file.
SETUP<x>:DATE? Returns the date when the specified
oscilloscope setup was saved
SETUP<x>:LABEL Sets or returns the specified oscilloscope
setup label
SETUP<x>:TIME ? Returns the time when the specified
oscilloscope setup was saved
2-32 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English