Tektronix MSO2012B Programmer's Manual

Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO2AUTO application m odule.
Group
Bus
Syntax
BUS:B<x>:LIN:IDFORmat {NOPARity|PARity }
BUS:B<x>:LIN:IDFORmat?
Arguments
NOPARity sets the LIN ID format to no parity.
PARity sets the LIN ID format to parity.
Examples
BUS:B1:LIN:IDFORMAT PARITY sets the LIN ID format to parity.
BUS:B1:LIN:IDFORMAT? might return BUS:B1:L IN:IDFORMAT NOPARITY
indicating that the LIN ID format is no parity.
BUS:B<x>:LIN:POLARity
Sets or returns the LIN polarity.
Conditions
This command requires a DPO2AUTO application m odule.
Group
Bus
Syntax
BUS:B<x>:LIN:POLARity {NORMal|INVerted }
BUS:B<x>:LIN:POLARity?
Arguments
NORMal specifies normal LIN polarity.
INVerted specifies inverted LIN polarity.
Examples
BUS:B1:LIN:POLARITY INVERTED sets the LIN polarity to INVERTED.
BUS:B1:LIN:POLARITY? might return BUS:B1:LIN:POLARITY NORMAL
indicating that the LIN polarity is normal.
BUS:B<x>:LIN:SAMPLEpoint
Sets or returns the sample point (in %) at which to sample during each bit period.
2-78 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2012B Specifications

General

Brand	Tektronix
Model	MSO2012B
Category	Test Equipment
Language	English