Tektronix MSO2024 Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
CH<x> specifies
a channel input as the clock source, where <x> = 1, 2, 3, or 4.
MATH specifies the ma th waveform as the clock source.
REF specifies the reference waveform as the clock source.
D<x> specifies the digital waveform as the clock source, where <x>=0–15
NONe specifies no clock source.
SEARCH:SE
ARCH<x>:TRIGger:A:LOGIc:INPut:D<x>
Sets or returns the waveform logic criteria for a trigger search. SEARCH<x> is the
search number and
D<x> is the digital channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:D<x> {HIGH|L OW|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:D<x>?
Arguments
HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a “don't care” condition.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:MATH
Sets or returns the Boolean logic criteria for a logic trigger search to determine
where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:MATH {HIGH|L OW|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:INPut:MATH?
Arguments
HIGH specifies a high logic level.
LOW specifies a low logic level.
X specifies a “don't care” condition.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-267

Tektronix MSO2024 Specifications

General

Brand	Tektronix
Model	MSO2024
Category	Test Equipment
Language	English