Tektronix MSO2024 Programmer's Manual

Command Groups
Table 2-24: Mar
k Commands
Command Description
MARK Move to the nex
t or p revious mark on the
waveform or returns a ll learnable settings
from the mark commands
MARK:CREATE Creates a mark on a particular waveform or
all wavefor
ms in a column
MARK:DELEte
Deletes a ma
rk on a particular waveform, all
waveforms in a colum n , or all marks
MARK:FREE? Returns how many marks are free to be used
MARK:SELected:END? Returns the end of the selected mark, in
terms of 0 to 100% of the waveform
MARK:SELected:FOCUS? Returns the focus of the selected mark, in
terms of
0 to 100% of the waveform
MARK:SE
Lected:MARKSINCOLumn?
Returns how many marks a re in the current
zoom pix
el column
MARK:S
ELected:OWNer?
Return
s the owner of the selected m ark
MARK:S
ELected:SOURCE?
Return
s the source waveform of the selected
mark
MARK:SELected:STARt? Returns the start of the selected mark, in
terms of 0 to 100% of the waveform
MARK:SELected:STATe? Returns the on or off state of the selected
mark
MAR
K:SELected:ZOOm:POSition?
Ret
urns the position of the selected mark, in
terms of 0 to 100% of the upper window
MARK:TOTal?
Ret
urns how many marks are used
2-24 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2024 Specifications

General

Brand	Tektronix
Model	MSO2024
Category	Test Equipment
Language	English