To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Conditions

This command re

quires a DPO2AUTO application m odule.

Group

Syntax

SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:DATa:DIRection

{READ|WRITE|NOCARE}

SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:DATa:DIRection?

Related Commands

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition

Arguments

READ speciﬁes the read condition.

WRITE speciﬁes the write condition.

NOCARE speciﬁes either a read or write condition.

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALiﬁer

Sets or returns the CAN data qua

liﬁer for a search.

SEARCH<x> is the search

number and

B<x> is the bus number. This only applies if the trigger condition is

IDANDDATA or DATA.

Conditions

This command requires a DPO2AUTO application m odule.

Group

Syntax

SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:DATa:QUALifier

{LESSThan|MOREThan|UNEQua l|LESSEQual|MOREEQual|EQual}

SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:DATa:QUALifier?

Related Commands

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue

Arguments

LESSThan searches for bus data less than the value speciﬁed by

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.

MOREThan searches for bus data more than the value speciﬁed by

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.

UNEQual searches for bus data not equal to the value speciﬁed by

SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.

2-248 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2024B Programmer's Manual

Other manuals for Tektronix MSO2024B