Tektronix MSO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Arguments
TTL specifies a p
reset
TTL high level of 1.4 V.
ECL specifies a preset ECL high level of –1.3 V.
<NR3> specifies the threshold voltage level.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:THReshold:REF<x>
Sets or retu
rns the reference waveform threshold level for a logic trigger search to
determine where to place a mark.
SEARCH<x> is the search number and REF<x>
is the reference channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:THReshold:REF<x>
{TTL|ECL|<NR3>}
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:THReshold:REF<x>?
Arguments
TTL specifies a preset TT L high level of 1.4 V.
ECL specifies a preset ECL high level of –1.3 V.
<NR3> specifies the threshold voltage level.
SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x>
Sets or returns the channel waveform lower threshold to determine where to place
a mark. This setting is applied to all channel searches that use a lower threshold.
SEARCH<x> is the search number and CH<x> is the channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LOWerthreshold:CH<x>
{TTL|ECL|<NR3>}
SEARCH:SEARCH<x>:TRIGger: A:LOWerthreshold:CH<x>?
Arguments
TTL specifies a preset TTL level of 1.4 V.
ECL specifies a preset ECLlevel of –1.3 V.
2-272 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix MSO2024B Specifications

General

Brand	Tektronix
Model	MSO2024B
Category	Test Equipment
Language	English