Commands Listed in Alphabetical Order
Group
Bus
Syntax
BUS:B<x>:LIN:STANDard {V1X|V2X|MIXed}
BUS:B<x>:LIN:STANDard?
Arguments
V1X sets the LIN standard to V1X.
V2X sets the LIN standard to V2X
MIXed sets the LIN standard to MIXED.
Examples
BUS:B1:LIN:STANDARD V1X sets the LIN standard is V1X.
BUS:B1:LIN:STANDARD? might return BUS:B1:LIN:STANDARD V2X
indicating that the LIN standard is V2X.
BUS:B<x>:PARallel:BIT<x>:SOUrce
Sets or returns the parallel bit source for B<x>, where x is the bus number and
Bit<x> is the bit number.
Group
Bus
Syntax
BUS:B<x>:PARallel:BIT<x>: SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D 8|D9|D10|D11|D12|D13|D14|D15}
BUS:B<x>:PARallel:BIT<x>: SOUrce?
Arguments
CH1–CH4 specifies the bit source B<x>. B IT<x> specifies the bit number.
D0–D15 specifies the bit source B<x>. BIT<x> specifies the bit number.
BUS:B<x>:PARallel:CLOCK:EDGE
Sets or returns the parallel clock edge for bus <x>, where x is the bus number.
Group
Bus
Syntax
BUS:B<x>:PARallel:CLOCK:E DGE {EITher|RISing|FALling}
BUS:B<x>:PARallel:CLOCK:E DGE?
2-80 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series O scilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
