Installation
Installation
The TCPA300 and TCPA400 current probe amplifiers let you use one probe to
simultaneously measure AC and DC current. The amplifiers convert the sensed
current into
a proportional voltage signal that you can measure directly with an
oscilloscope. The amplifiers and associated probes provide these features:
Simultaneo
us DC and AC current measurements up to 750 A peak
High sensitivity
One-button autobalancing and probe degaussing
No adjustments needed to match a current probe to an individual amplifier
AC or DC coupling of signal
Direct scaling and unit readout on compatible TEKPROBE level II
oscilloscopes
Standard accessories
The following accessories are shipped with the amplifiers and probes.
Amplifiers
The fo
llowing accessories are shipped with the TCPA300 and TCPA400
amplifiers.
Powe
r Cord (customer-chosen option)
TEKPROBE Interconnect Cable
Certificate of Traceable Calibration
Probes
When you order a current probe, you will receive these accessories:
Probe cover (TCP303 and TCP404XL only)
P
robe ground lead, 6 inch length (TCP305A and TCP312A only)
Instruction Sheet
Certificate of Traceable Calibration
12 Amplifiers and Current Probes Compliance and Safety Instructions
To Next Page
Loading...
Need help?
General
