Tektronix TDS 500D series User Manual

Appendix B: Algorithms
TDS 500D, TDS 600B, & TDS 700D User Manual
B–5
StartCycle — is the starting time for cycle measurements. It is a floating-point
number with values between 0.0 and ( – 1.0), inclusive.
 = 
EndCycle — is the ending time for cycle measurements. It is a floating-point
number with values between 0.0 and ( – 1.0), inclusive.
 = 
Waveform[<0.0 ... RecordLength–1.0>] — holds the acquired data.
TPOS — is the location of the sample just before the trigger point (the time
reference zero sample). In other terms, it contains the domain reference location.
This location is where time = 0.
TSOFF — is the offset between  and the actual trigger point. In other
words, it is the trigger sample offset. Values range between 0.0 and 1.0 samples.
This value is determined by the instrument when it receives a trigger. The actual
zero reference (trigger) location in the measurement record is at
(+).

Tektronix TDS 500D series Specifications

General

Brand	Tektronix
Model	TDS 500D series
Category	Test Equipment
Language	English