Tektronix TDS 520B - Page 46

Command Groups
2–26
TDS Family Oscilloscope Programmer Manual
Table 2–19: Trigger Commands (Cont.)
Header Description
TRIGger:MAIn:LOGIc:INPut:CH<x>
(TDS 510A, 500B, 600B, & 700A)
Logic trigger expected channel state
TRIGger:MAIn:LOGIc:PATtern:
INPut:CH4
(TDS 510A, 500B, 600B, & 700A)
Logic trigger expected for channel 4 pattern
class
TRIGger:MAIn:LOGIc:PATtern:WHEn
(TDS 510A, 500B, 600B, & 700A)
Main logic pattern trigger condition
TRIGger:MAIn:LOGIc:PATtern
:WHEn:LESSLimit
(TDS 510A, 500B, 600B, & 700A)
Maximum time the selected pattern may be
true and still generate main logic pattern
trigger
TRIGger:MAIn:LOGIc:PATtern
:WHEn:MORELimit
(TDS 510A, 500B, 600B, & 700A)
Minimum time the selected pattern may be
true and still generate main logic pattern
trigger
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:EDGE
(TDS 500B, 600B & 700A)
Clock edge polarity for setup and hold violation
triggering
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:LEVel
(TDS 500B, 600B & 700A)
Setup/Hold clock voltage trigger level
TRIGger:MAIn:LOGIc:SETHold:
CLOCk:SOUrce
(TDS 500B, 600B & 700A)
Setup/Hold clock input source
TRIGger:MAIn:LOGIc:SETHold:
DATa:LEVel
(TDS 500B, 600B & 700A)
Setup/Hold data level
TRIGger:MAIn:LOGIc:SETHold:
DATa:SOUrce
(TDS 500B, 600B & 700A)
Setup/Hold data input data channel
TRIGger:MAIn:LOGIc:SETHold:
HOLDTime
(TDS 500B, 600B & 700A)
Setup/Hold trigger hold time
TRIGger:MAIn:LOGIc:SETHold:
SETTime
(TDS 500B, 600B & 700A)
Setup/Hold trigger set time
TRIGger:MAIn:LOGIc:STATE:INPut:
CH4
(TDS 510A, 500B 600B, & 700A)
Logic trigger expected for channel 4 state
class
TRIGger:MAIn:LOGIc:STATE:WHEn
(TDS 510A, 500B, 600B, & 700A)
When the logic trigger occurs (on true or false)
TRIGger:MAIn:LOGIc:THReshold?
(TDS 510A, 500B, 600B, & 700A)
Return main logic thresholds