Tektronix TDS 520B - Page 50

Command Groups
2–30
TDS Family Oscilloscope Programmer Manual
Table 2–19: Trigger Commands (Cont.)
Header Description
TRIGger:MAIn:VIDeo:LINES
(TDS 400A Option 05)
Set video trigger delay in terms of a number of
lines
TRIGger:MAIn:VIDeo:NTSc
(TDS 510A, 500B, 600B, & 700A Option 05)
Select color or mono NTSC
TRIGger:MAIn:VIDeo:PAL
(TDS 510A, 500B, 600B, & 700A Option 05)
Select color or mono PAL
TRIGger:MAIn:VIDeo:SCAN
(TDS 400A Option 05)
Set video trigger scan rate
TRIGger:MAIn:VIDeo:SCANPeriod
(TDS 400A Option 05)
Set video trigger scan period
TRIGger:MAIn:VIDeo:SOUrce
Option 05
Select video trigger source
TRIGger:MAIn:VIDeo:STANdard
(TDS 510A, 500B, 600B, & 700A Option 05)
Select video trigger standard
TRIGger:MAIn:VIDeo:SYNc
(Option 05)
Select video trigger sync polarity
TRIGger:MAIn:VIDeo:SYStem
(TDS 400A Option 05)
Select video trigger class
TRIGger:MAIn:VIDeo:TIMe
(TDS 400A Option 05)
Set video trigger delay time
TRIGger:STATE? Return trigger system status