Tektronix TG8000 Declassification And Security Instructions

Clear and sanitize procedures
7. Press the ENTER
button to start the selected backup operation.
8. A warning message is displayed asking you to v erify the operation. Press the
ENTER button t
o proceed or press the BACK button to cancel the operation.
9. Monitor the progress of the file copy operation:
a. During the first stage of the copy process, the display shows the names
of the files as they are copied. Depending on the size of the files being
copied, thi
s may take a couple of minutes.
b. When all of the files have been copied, the message “Finishing copy...” is
displayed
while the file system buffers are emptied. This message may
appear for a couple of minutes.
c. When the b
ackup operation is complete, the m essage “Backup completed
successfully” is displayed before the menu display returns to normal.
NOTE. If the USB drive runs out of memory before the backup operation
is complete, the operation w ill copy as much data as it can and will then
display an error message stating that the backup operation was incomplete
becausethedriveordeviceisfull.Press the ENTER or BACK button to clear
the er
ror message.
10. After the backup operation is complete, press the up (▲)ordown(▼) arrow
butt
on to select TG8000 : UTILITY : USB (Mounted).
11. Press the ENTER button to unmount the USB drive. After the message “You
may
now safely remove the USB drive” is displayed, the menu readout should
change to TG8000 : UTILITY : USB (Not mounted).
12
.
Re
move the USB drive from the instrument.
Delete the presets and user files from the instrument.
1
3.
C
onnect the instrument and a computer using an Ethernet connection as
described in the TG8000 User Manual.
14. On the computer, open an FTP client such as Windows Explorer.
15. In the Windows Explorer command box, enter “ftp://IP address”, where IP
address is the network address assigned to the TG8000 generator.
NOTE. Some FTP clients may ask for login credentials. In this case, login with a
user name of “anonymous” and no password.
TG8000 Declassification and Security Instructions 9

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English