What to do if I forgot the password for my Teldat Network Router?
If you've forgotten your access password for the Teldat Network Router, you can ignore the current configuration by using the RST button. Refer to the relevant section for detailed instructions on how to do this.
Why none of the LEDs light up on my Teldat TLDPM01F1?
If none of the LEDs light up on your Teldat Network Router, check the power supply to the router, including the power source, the ON/OFF switch, and the main power outlet.
What to do if the WAN connector LED never lights up on Teldat Network Router?
If the WAN connector LED on your Teldat Network Router never lights up, check the Ethernet cable and the connection to the network. Also, verify that the appropriate license is available for use. For further details, consult the manual “Teldat Dm709-I LAN Interfaces.”
What to do if the LAN connector LED never lights up on Teldat Network Router?
If the LAN connector LED on your Teldat Network Router never lights up, check the Ethernet cable and the connection to the network. Consult the manual “Teldat Dm709-I LAN Interfaces” for more information.
How to fix Wi-Fi LED if it never lights up in green on Teldat Network Router?
If the Wi-Fi LED never lights up in green on your Teldat Network Router, check the router configuration and that of the remote station(s). Consult the manual “Teldat Dm771-I WLAN Interfaces” for further information.
Why are none of the LEDs lighting up on my Teldat Network Router?
If none of the LEDs on your Teldat Network Router are lighting up, check the power supply. This includes verifying the power source, the ON/OFF switch, and the main power outlet.
General| Product Type | Router |
|---|---|
| Model | TLDPM01F1 |
| Manufacturer | Teldat |
| WAN Ports | 1 |
| LAN Ports | 4 |
| Firewall | Yes |
| VPN | Yes |
| Ports | 4 x LAN, 1 x WAN |
| VPN Support | IPsec |
| Power Supply | External |
Details the components and connectors found on the front, rear, and side panels of the Teldat M2 router.
Provides instructions for standalone, wall, and 19" rack installations of the Teldat M2 router.
Describes the requirement for an external AC/DC power adapter and its connection to the device.
Explains the RST button's functions for device rebooting and restoring default configurations.
Details the various data connection interfaces, including 4-port Ethernet, WAN combo, 2.5G WAN, Wi-Fi, WWAN, and xDSL.
Guides users on how to safely install SIM cards into the Teldat M2, including necessary precautions.
Lists essential safety warnings for power supply, laser radiation, SIM card handling, and installation environments.
Provides solutions for common installation issues, guiding users to check power, connections, and settings.
Describes the pin assignments and electrical signals for various connectors like LAN, WAN, xDSL, and power supply.
Covers hardware architecture, LAN/WAN interfaces (Base-T, SFP), Wireless LAN, WWAN, xDSL, power, dimensions, and environmental data.
To Next Page
