2
INDEX
1. PRODUCT DESCRIPTION --------------------------------------------------------------- p. 3
2. INSTALLATION ----------------------------------------------------------------------- p. 4 - 8
2.1 Mounting the product
2.2 Mounting the wireless safety system (BST24/BST25/BST25S)
2.3 Control unit diagram
2.4 Electrical connections
2.5 Wired safety device connections
3. PRELIMINARY CHECK AND INITIAL START-UP --------------------------------------- p. 9 - 11
3.1 Limit switches configuration
3.2 Deactivation of wireless safety system
3.3 Exclusion of safety edge in the last 5cm of the closure
4. TRANSMITTERS MEMORIZATION -------------------------------------------------------- p. 12 - 14
4.1 Single channel memorization
4.2 Double channel memorization
4.3 Single channel: Courtesy light ON/OFF
4.4 Four channels memorization
4.5 Remote memorization of the first transmitter
4.6 Remote memorization of further transmitters
4.7 Alarm function: shock sensor memorization
4.8 Single channel: door status request (“ASK”)
5. TRANSMITTERS DELETION -------------------------------------------------------- p. 15
5.1 Deleting a single transmitter
5.2 Deleting all the transmitters
5.3 Remote deletion of a transmitter
6. TIME SETTINGS ----------------------------------------------------------------------- p. 16
6.1 Auto close time setting
6.2 Courtesy light time setting
7. OTHER PROGRAMMING --------------------------------------------------------------- p. 17
7.1 “Holiday mode”
8. TECHNICAL SPECIFICATIONS ------------------------------------------------------ p. 18
8.1 WARNINGS
9. TROUBLESHOOTING (What to do if...) ----------------------------------------------- p. 19 - 20
To Next Page
Loading...
