EasyManua.ls Logo

Teleco Flat Sat Classic Smart 65 - User Manual

Teleco Flat Sat Classic Smart 65
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation guide
and user manual
GB
Question and Answer IconNeed help?

Do you have a question about the Teleco Flat Sat Classic Smart 65 and is the answer not in the manual?

Summary

TELECO WARRANTY

Warranty Terms and Exclusions

Covers warranty coverage, duration, and specific exclusions for defects and damage.

General Information

Product Introduction and Contact

Introduces the product, provides contact details for manufacturer support and information.

List of Accessories

Supplied Components Overview

Lists all items included with the Flat Sat Classic Smart system.

Installation Preparation

Packaging and Initial Damage Inspection

Details product packaging and initial inspection steps to identify transport damage.

First Steps: Dish to Driving Unit Mounting

Provides the first steps to mount the dish onto the driving unit.

Assembly Instructions

Selecting the Roof Installation Site

Guides the user on selecting an unobstructed area on the vehicle roof for antenna placement.

Base Plate Mounting Preparation

Instructs on cleaning the roof and positioning the base plate correctly for mounting.

Outside Unit Installation on Base Plate

Details how to attach the main antenna unit to the prepared base plate.

Cable Connection with Extensions

Explains how to connect cables using extensions and route them safely.

Control Unit Installation

Control Unit and Panel Placement

Guides on selecting suitable locations for the control unit and its panel.

Connections and Wiring

System Component Connections

Illustrates the connections between the motor unit, LNB, receiver, and power source.

Power Connector Safety Warning

Critical warning about correct insertion of the power connector to prevent damage.

Important Installation Precautions

Power and Motor Unit Cable Handling

Emphasizes proper power cable routing and warns against cutting the motor unit cable.

LNB Angle Adjustment for Reception

Explains how to adjust the LNB angle for optimal satellite signal reception.

Antenna Tracking and Optimization

LNB Tilt Adjustment Guide

Provides step-by-step instructions for adjusting the LNB tilt.

Vehicle Positioning for Signal Reception

Guides on positioning the vehicle for clear satellite signal reception.

Best Use Tips

Optimal Parking and Operation Guidelines

Offers advice on parking, environmental conditions, battery management, and engine operation effects.

System Operation

Automatic Satellite Search Function

Describes the system's automatic satellite acquisition capabilities.

Smart Functionality

Explains the "Smart" feature for simplified program selection.

Control Panel Interface and Standby

Details the control panel layout, buttons, and standby mode behavior.

Switching On and Satellite Search

System Activation and Search Process

Guides on how to power on the system and initiate a satellite search.

Program Selection and System Shutdown

Automatic Program-Satellite Association

Explains how the system links TV programs to specific satellites.

Antenna Parking and System Power Down

Details the procedure for parking the antenna and turning off the system.

Automatic Parking and Faults

Automatic Antenna Parking with Safety Wire

Describes the automatic antenna lowering triggered by the vehicle's engine.

Error Message Interpretation

Explains common error messages and their potential causes.

Troubleshooting and Specifications

Troubleshooting Common Issues

Provides solutions for common problems like no satellite lock or no image.

Technical Specifications Summary

Lists key technical data including search system, power, dimensions, and weight.

Conformity Certificate

Manufacturer Compliance Declaration

Certifies that the product adheres to relevant European standards and directives.

Summary

TELECO WARRANTY

Warranty Terms and Exclusions

Covers warranty coverage, duration, and specific exclusions for defects and damage.

General Information

Product Introduction and Contact

Introduces the product, provides contact details for manufacturer support and information.

List of Accessories

Supplied Components Overview

Lists all items included with the Flat Sat Classic Smart system.

Installation Preparation

Packaging and Initial Damage Inspection

Details product packaging and initial inspection steps to identify transport damage.

First Steps: Dish to Driving Unit Mounting

Provides the first steps to mount the dish onto the driving unit.

Assembly Instructions

Selecting the Roof Installation Site

Guides the user on selecting an unobstructed area on the vehicle roof for antenna placement.

Base Plate Mounting Preparation

Instructs on cleaning the roof and positioning the base plate correctly for mounting.

Outside Unit Installation on Base Plate

Details how to attach the main antenna unit to the prepared base plate.

Cable Connection with Extensions

Explains how to connect cables using extensions and route them safely.

Control Unit Installation

Control Unit and Panel Placement

Guides on selecting suitable locations for the control unit and its panel.

Connections and Wiring

System Component Connections

Illustrates the connections between the motor unit, LNB, receiver, and power source.

Power Connector Safety Warning

Critical warning about correct insertion of the power connector to prevent damage.

Important Installation Precautions

Power and Motor Unit Cable Handling

Emphasizes proper power cable routing and warns against cutting the motor unit cable.

LNB Angle Adjustment for Reception

Explains how to adjust the LNB angle for optimal satellite signal reception.

Antenna Tracking and Optimization

LNB Tilt Adjustment Guide

Provides step-by-step instructions for adjusting the LNB tilt.

Vehicle Positioning for Signal Reception

Guides on positioning the vehicle for clear satellite signal reception.

Best Use Tips

Optimal Parking and Operation Guidelines

Offers advice on parking, environmental conditions, battery management, and engine operation effects.

System Operation

Automatic Satellite Search Function

Describes the system's automatic satellite acquisition capabilities.

Smart Functionality

Explains the "Smart" feature for simplified program selection.

Control Panel Interface and Standby

Details the control panel layout, buttons, and standby mode behavior.

Switching On and Satellite Search

System Activation and Search Process

Guides on how to power on the system and initiate a satellite search.

Program Selection and System Shutdown

Automatic Program-Satellite Association

Explains how the system links TV programs to specific satellites.

Antenna Parking and System Power Down

Details the procedure for parking the antenna and turning off the system.

Automatic Parking and Faults

Automatic Antenna Parking with Safety Wire

Describes the automatic antenna lowering triggered by the vehicle's engine.

Error Message Interpretation

Explains common error messages and their potential causes.

Troubleshooting and Specifications

Troubleshooting Common Issues

Provides solutions for common problems like no satellite lock or no image.

Technical Specifications Summary

Lists key technical data including search system, power, dimensions, and weight.

Conformity Certificate

Manufacturer Compliance Declaration

Certifies that the product adheres to relevant European standards and directives.

Teleco Flat Sat Classic Smart 65 Specifications

General IconGeneral
Antenna Size65 cm
Diameter65 cm
MaterialAluminum
Frequency Range10.7-12.75 GHz
PolarizationLinear
TypeSatellite Antenna
Mounting TypePole Mount
Antenna TypeFlat Panel

Related product manuals