Need help?Do you have a question about the Teleco TeleSat S65 and is the answer not in the manual?
Connecting motor unit, LNB, receiver/TV, and powering the system.
Caution on connecting the 3-way power connector to the correct 12 Vdc POWER socket.
Adjusting LNB angle for optimal signal reception in specific European geographic locations.
Steps to power on the system, check indicators, and select the desired satellite using the control panel.
Process of searching for a satellite, automatic position saving, and stowing the antenna.
Diagnosing satellite search failures, no image/message issues, and control panel power-on problems.
Connecting motor unit, LNB, receiver/TV, and powering the system.
Caution on connecting the 3-way power connector to the correct 12 Vdc POWER socket.
Adjusting LNB angle for optimal signal reception in specific European geographic locations.
Steps to power on the system, check indicators, and select the desired satellite using the control panel.
Process of searching for a satellite, automatic position saving, and stowing the antenna.
Diagnosing satellite search failures, no image/message issues, and control panel power-on problems.
To Next Page
General
