Teleco TRC METER User Manual

Data setting instructions: Press the key K4 to set data, scroll through settings and store modified data.
Press the key K1 to display the next data and then K2 and K3 to modify the data.
1. Temperature options:
°C degrees Celsius degrees (°C)
°F degrees Fahrenheit degrees (°F)
2. Backlighting instructions:
Backlighting is activated by pressing any key. To set the time during which backlighting is active, press K4
followed by K1. Backlighting options:
OFF: backlighting always off On: backlighting always on
B: 30 backlighting on for 30 seconds B: 20 backlighting on for 20 seconds
B: 10 backlighting on for 10 seconds B: 05 backlighting on for 5 seconds
N.B.: The backlighting timer starts when a key is last pressed. There are 2 possible backlighting
settings:
FULL: maximum brightness
HALF: lower brightness
Modification over
Minute modify 0~59 flash K2 K3 modify the number
Temperature Units (from degree to Fahrenheit
hour modify 24'lhrs 0
~23 flash K2 K3 modify the number
Data repeat option default: auto
Black Lightbrilliance default: 30 seconds
Black Light Timer default: 30 seconds
K4 for setting

Teleco TRC METER Specifications

General

Brand	Teleco
Model	TRC METER
Category	Controller
Language	English