Need help?Do you have a question about the Teledyne Lecroy HDO4104A and is the answer not in the manual?
General| Bandwidth | 1 GHz |
|---|---|
| Channels | 4 |
| Form Factor | Benchtop |
| Vertical Resolution | 12-bit |
| Display Type | LCD |
| Input Coupling | AC, DC, GND |
| Display | 12.1 inch |
| Input Impedance | 1 MΩ ± 1% in parallel with 16 pF ± 2 pF; 50 Ω ± 1% |
| Operating Temperature | 0°C to +40°C |
Precautions relating to power and cooling.
Sections covering oscilloscope operation and care.
Documentation availability on the website.
Alerts for potential instrument and safety hazards.
Guidelines for safe operation and handling.
Checking shipment, carrying, and placement.
Adjusting viewing angles for the instrument.
Using the standby button and proper shutdown.
Firmware updates and option licensing.
Power, BNC, USB, Mixed Signal ports.
Video, Ethernet, Audio ports.
Aux Out, Ref In/Out, USBTMC, AC Power.
BNC connectors and ProBus interface.
Compatibility and specifications.
Primary control and display interface.
Main navigation for oscilloscope functions.
Area displaying waveform traces and divisions.
Summarizing settings and acting as navigation.
Details for analog signal inputs.
Trigger position and delay markers on the display.
Quick access to common functions.
Turn/push actions for control.
Level, Auto, Normal, Single, Stop modes.
Delay and Time/division adjustment.
Channel, Offset, Gain, Dig button.
Accessing trace functions.
Type and knob for cursor placement.
Adjust knob and intensity settings.
Turning traces on/off.
Using trace descriptor boxes.
Magnifying selected regions of a trace.
Methods to disable zoom traces.
Using the front panel zoom button.
Scale, offset, coupling, bandwidth.
Noise filtering and interpolation.
Probe attributes and settings.
Compensating for propagation delays.
Line and Bus display modes.
Status of digital lines.
Configuring digital line groups.
Choosing display modes: Lines, Bus, Lines & Bus.
Real Time, Sequence, Roll, RIS.
Time/Division, Delay settings.
Simple, Pattern, SMART Triggers.
Auto, Normal, Single, Stop.
Edge, Width, Pattern, TV.
Interval, Glitch, Runt, SlewRate.
Core trigger configuration.
Setting the trigger threshold.
Waiting a duration before triggering.
Counting events before triggering.
Auto, Single, XY, XYSingle.
Adjusting grid and trace appearance.
Plotting phase shift between signals.
Revealing signal anomalies over time.
Standard and special cursor options.
Display and positioning cursors.
Narrowing waveform span for analysis.
Configuring custom parameters.
Amplitude, Area, Base, Delay, etc.
Miniature histograms for statistical distribution.
Plotting parameter measurements over time.
Applying math operations.
Plotting trends using the Trend button.
Creating single/dual operator traces.
Applying multiplication factors and constants.
Applying ERes as pre-processing or math.
Filters and bandwidth reduction.
Configuring output type and weighting windows.
Selecting spectral window types.
Pass/Fail, WaveScan.
Reviewing acquisition history.
Edge, Non-monotonic, Runt, Measurement modes.
Detecting signal edges.
Finding multi-threshold crossing events.
Identifying incomplete pulses.
Searching for events in acquisitions.
Comparing signals against a mask.
Creating a new mask from a waveform.
Recalling saved or industry standard masks.
Navigating and selecting acquisitions.
Instrument interaction and preferences.
Maintaining touch screen accuracy.
Instrument information display.
Configuring TCPIP, LXI, USBTMC, GPIB.
Adding and configuring printers.
Saving captures to a file.
Copying captures for pasting.
Emailing capture files.
Manual calibration procedures.
Configuring date and time.
Managing files on the instrument.
Organizing files.
Instrument audio output.
Temperature dependent calibration.
Setting display language.
Optimizing for analysis or display.
Storing and recalling panel configurations.
Methods for saving setups.
Saving traces to internal memory.
Selecting data formats for saving.
Automatic waveform saving after trigger.
Retrieving saved waveforms.
Capturing and documenting oscilloscope state.
Pen, Circle, Arrow, Text for annotations.
Choosing entries for management.
Applying criteria to lists.
Previewing entries before output.
Organizing entries by project/user.
Saving notebooks to external media.
Recalling saved oscilloscope states.
Replacing default logo in reports.
Exterior cleaning instructions.
Factory and manual calibration options.
Maintaining touch screen accuracy.
Changing display and OS language.
Installing license keys.
Downloading and installing firmware.
Restoring operating system and application.
Steps for restoring using Acronis.
Installing the X-Stream DSO.
Contacting service centers.
Submitting requests via website.
Electromagnetic Compatibility declarations.
Compliance declarations.
Product safety standards.
UL certification.
End-of-Life Handling, RoHS, ISO.
Terms and conditions of product warranty.
To Next Page
