Need help?Do you have a question about the Teledyne Lecroy WaveSurfer 3024Z and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Channels | 4 |
| Display | 10.1" capacitive touch screen |
| Vertical Resolution | 8 bits |
| Input Coupling | AC, DC, GND |
| Sample Rate | 2 GS/s |
| Input Impedance | 1 MΩ |
| Max Input Voltage | 400 V (DC + peak AC) |
| Trigger Types | Edge, Pulse Width, Interval, Dropout |
| Interface | USB, LAN |
| Operating Temperature | 0°C to +50°C |
| Dimensions | 150 mm |
| Memory Depth | 10 Mpts/Ch (5 Mpts/Ch interleaved) |
Essential safety guidelines and operational warnings for instrument use.
Details on front/back panel connectors, I/O ports, and controls.
Instructions for connecting external devices like LAN, USB, and monitors.
Guide to interacting with the touch-sensitive display and its controls.
Explains grids, indicators, and trace presentation on the screen.
Covers panning, zooming, labeling, and adjusting waveforms.
Configuring parameters like vertical scale, timebase, and sampling modes.
Explains trigger types, modes, and setup for capturing events.
Using cursors for precise measurements and displaying results.
How to apply mathematical operations to waveform data.
Utilizing WaveScan and Pass/Fail testing for signal analysis.
Procedures for saving and loading instrument configurations.
Methods for saving and retrieving waveform data.
Creating and managing entries for instrument states and data.
Managing utilities, preferences, and instrument status.
Setting up network connections and remote operation.
Guidelines for keeping the instrument in optimal working condition.
Details on EMC, safety, and hazardous substance standards.
Information regarding the instrument's warranty coverage.
To Next Page
