Need help?Do you have a question about the Teledyne Lecroy WaveSurfer 4000HD and is the answer not in the manual?
General| Sample Rate | up to 5 GS/s |
|---|---|
| Channels | 4 |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Input Coupling | AC, DC, GND |
| Bandwidth | up to 1 GHz |
| Display | 12.1" capacitive touchscreen |
| Input Impedance | 1 MΩ |
| Trigger Types | Edge, Pulse Width, Window, Interval, Dropout, Runt, Slew Rate, Pattern |
| Vertical Resolution | 8 bits |
| Max Input Voltage | 400 Vpk |
| Timebase Accuracy | 5 ppm |
| Interface | USB |
| Operating Temperature | 0°C to 50°C |
| Weight | approximately 10 lbs |
Describes safety symbols and precautions for instrument use.
Details temperature, humidity, altitude, and terminal voltage ratings.
Identifies and describes controls on the front of the oscilloscope.
Identifies and describes ports and connectors on the back of the oscilloscope.
Explains the function of front panel buttons and knobs for operation.
Covers ProBus, analog inputs, and probe features.
Guides through powering on, software activation, and language selection.
Explains connections for LAN, USB, external monitors, and printers.
Details how to customize the Save/User button for specific actions.
Describes touch screen, menu bar, descriptor boxes, dialogs, and message bar.
Explains touch, drag, and swipe gestures for setup and control.
Covers active, foreground traces, and trace manipulation.
Details turning traces on/off, adjusting settings, and adding labels.
Explains how to create and adjust zoom traces for detailed analysis.
Automates essential acquisition settings based on input signals.
Covers V/div, offset, and probe specific settings.
Explains connecting and configuring digital signals via leadsets.
Details creating digital groups, setting display modes, and line renaming.
Explains Time/div, delay, sampling modes, and memory settings.
Describes Average, Real Time, and Roll sampling modes.
Covers specialized acquisition modes for event capture.
Details trigger types, modes, and setup parameters.
Configures screen layout, grid number, and orientation.
Adjusts trace style, intensity, and persistence effects.
Explains how to use cursors for waveform measurements.
Details using dialogs for precise cursor placement and tracking.
Covers viewing measurements and configuring parameters.
Explains how to gate measurements and view statistics.
Defines common waveform measurement parameters.
Describes how to plot parameter trends over time.
Guides on creating and applying mathematical operations to traces.
Lists and describes available math operations.
Details Average, ERes, FFT, and Rescale functions.
Procedure for storing acquired waveforms in memory slots.
How to recall stored waveforms from memory to the display.
Tool for finding specific events in acquisitions.
Compares acquired signals against a defined mask.
Procedures for making, loading, and running mask tests.
Captures and stores composite data including waveforms and setups.
Covers saving trace data, configurations, and screen captures.
Automatically saves data upon trigger events.
Restores saved waveforms, setups, and LabNotebooks.
Options for sharing data and printing the display.
Manages files and folders on the instrument's storage.
Accesses system settings and instrument information.
Configures network connections and remote control protocols.
Covers time settings, software options, and disk operations.
Customizes instrument appearance and performance.
Steps for manual calibration and warm-up recommendations.
Guide for updating the oscilloscope's firmware.
Provides contact details for support and service.
Instructions for sending the instrument for repair or calibration.
Lists certifications related to electromagnetic compatibility and safety.
Covers environmental compliance, quality management, and patents.
Outlines the terms and conditions of the product warranty.
To Next Page
