Telefire TSA-200 User Manual

Control Panels
TSA-200 / TSA-200XT
and
TSA-240 / TSA-240XT
Conventional
Two-and Four-Zone
Fire Alarm Control Panel
Technical Manual
T ELEFIRE F IRE & G AS D ETECTORS L TD
PO Box 7036
Petach Tikva 49250
Israel
Tel: 972 3 970 0400
Fax: 972 3 921 1816
eMail: info@telefire.co.il
Web: www.telefire.co.il
TSA
TSATSA
TSA-
--
-200
200200
200En
EnEn
En106
106106
106.pdf
.pdf.pdf
.pdf
Revision 1.06
July 2014

Telefire TSA-200 Specifications

General

Brand	Telefire
Model	TSA-200
Category	Control Panel
Language	English

Summary

2 Functions and Options

2.3 TSA-200XT / TSA-240XT Extinguishing-Specific Functions

Describes specific functions for extinguishing models.

5 Safety

5.1 Grounding and Mains Supply Wires Connection

Provides instructions for proper grounding and connecting mains supply wires.

5.2 Batteries Handling and Safety

Outlines essential safety precautions for handling and managing batteries.

6 Access Levels

7 Technical Specifications

7.2 Numbering of Inputs and Outputs

9 Installation

9.1 System Installation Planning

Covers planning aspects like capability and current requirements for system installation.

9.2 Mounting

Provides detailed guidance on how to physically mount the control panel.

9.3 Wiring

Explains wiring considerations, routing cables, and maintaining protection levels.

9.4 End of Line Resistors

9.6 Installation of Detectors and Manual Call Points

9.7 Connecting the Interfaces

9.8 Connecting the Mains Power and Batteries

Step-by-step guide for connecting the main power supply and batteries.

10 Post-Installation

10.1 Configuring the Control Panel

Explains how to configure the control panel using default or custom settings.

10.2 Field Test

Details how to perform a field test for all connected devices.

10.3 Outputs Test

10.4 Arming the Extinguishing device

Instructions for arming the extinguishing devices after installation.

10.5 Change Password

Recommends changing default passwords for security.

11 Extinguishing

11.1 Adding Extinguishing Capability

Explains how to add extinguishing functionality by installing an expansion module.

11.3 Extinguishing Adapters

11.4 Type and Number of Extinguishing Adapters

11.5 Gas Extinguishing – SAFE Solenoid-Operated Gas Cylinders

Details connection for SAFE solenoid-operated gas cylinders.

11.6 Gas Extinguishing – FIKE Solenoid-Operated Gas "FIRERASER" Cylinders

Details connection for FIKE solenoid-operated gas cylinders.

11.7 Gas Extinguishing – FIKE GCA- Gas Operated Cylinders

Details connection for FIKE GCA-operated gas cylinders.

11.8 Aerosol Extinguishing – FirePro Aerosol Generators

11.9 Aerosol Extinguishing – GreenEX Aerosol Generators

12 User Interface-Display and Keyboard

13.2 Fault Display Area

13.5 Keyboard

13.6 Extinguishing Display Area

14 Work States

14.2 Alarm State

14.3 Pre Discharge Warning Time (Extinguishing Delay)

Details the pre-discharge warning time for extinguishing operations.

14.4 Extinguishing Pulse Duration and the Activated Condition

Describes the duration and condition of the extinguishing pulse.

14.5 Post Extinguishing Pulse, No Reset

15 Operating Instructions

15.2 Manual Only

15.3 Manual Activation

15.5 Extinguishing Delay

Details the programmable extinguishing delay or pre-discharge warning time.

15.6 Inhibit (Abort/Hold)

Explains how to inhibit or abort the extinguishing process.

15.7 Abort/Hold and Manual Activation

15.9 Reset

15.10 Silencing and Resounding

15.12 Fault

16 Control Panel Configuration and Programming

16.1 Programming by a PC

Outlines parameters programmable via PC software.

16.2 Programming and Settings by the Front Panel

Details settings and configurations adjustable via the panel's interface.

16.3 Menu Structure – Access Level 3

Provides a flowchart for navigating the programming menus at access level 3.

16.4 Entering the Programming Mode

16.5 Exiting the Programming Mode

16.6 Keyboard Keys Functions during Programming

16.8 Programming Sequence

16.9 Alarm Delay (ON/OFF)

Details how to enable or disable the alarm delay (AVF) function.

16.10 Programming the Extinguishing Module

Covers programming extinguishing delay, activation conditions, and module disablement.

16.11 Saving Data and Exiting the Programming Mode

17 Support Functions Programming

17.1 Menu Structure – Access Level 2

17.2 Enabling or Disabling an Input or Output

17.3 Field Test

18 Commissioning

19 Maintenance

20 Routine Testing

20.1 Weekly Inspection – To Be Performed By Site Personnel

21 Troubleshooting

21.1 Faults

Explains fault indications and troubleshooting steps.

21.2 Maintenance Alert

TSA-200 Instructions for Immediate Action

Alarm

Return to Normal Operation from Alarm

Automatic Extinguishing

Explains the automatic extinguishing process and post-extinguishing state.

Fault

Describes fault conditions, indications, and resolution.