Teleflex Marine MV-3 Series - User Manual

INSTALLATION MANUAL
Page 1 of 12
Manual # 0550001-687 Revision 1
INSTALLATION AND OPERATION OF MV-3 SERIES
SIDE MOUNT CONTROL
OWNER’S MANUAL
For Single Station Only
These “saftey alerts” alone cannot elim-
inate the hazards they signal. Strict
compliance to these special instruc-
tions when installing, operating or
performing maintanence and using
common sence are the most effective
accident prevention measures.
Hazards or unsafe practices
which COULD result in seve
r
personel injury or death.
WARNING
!
NOTICE
Throughout this manual, Warnings and Cautions, accompa-
nied by the International Hazard Symbol , are used to alert the manufacturer or installer to special
instructions concerning a particular service or operation that may be hazardous if preformed incor-
rectly or carelessly.
Warnings alone do not eliminate dangers, nor are the a substitute for safe boat handling and proper
accident prevention measures. Observe these alerts carefully!
!
DANGER
!
Immediate Hazards which
WILL result in severe
personel injury or death.
Hazards or unsafe practices
which COULD result in injury,
product and/or property
damage.
CAUTION
!
NOTICE
Information that is important to
the proper installation,
op
eration and maintenance, but
is not hazard related.
INSTALLER: THESE INSTRUCTIONS CONTAIN IMPORTANT SAFETY INFORMATION AND MUST BE FORWARDED TO THE BOAT OWNER.

Summary

Control Configuration

Repositioning Shift Arm

Explains how to reposition the shift arm for different transmission shift functions and pivot hole selection.

Reversing Throttle Action

Choosing Control Location

Measuring Cable Length

Connecting Shift Cable

Connect Throttle Cable

Neutral Safety Switch

Mount Control

Cable Path

Berkeley Jet Control

Neutral Safety Switch Option

Describes the availability and installation of a neutral safety switch kit for Berkeley jet versions.

Routing Control Cables

Instructions for routing control cables to the carburetor and jet gate for Berkeley Jet.

Control Installation Completion

Details positioning the hand lever and fastening recommendations for control installation.

9.4 Final Adjustments

Guides final adjustments for the jet gate and carburetor arm for proper operation.

MV-3 For Sport Boats

FOR INBOARDS AND OUTBOARDS

Lists available parts for MV-3 controls used with inboard and outboard engines.

MV-3 For Berkeley Jets

PARTS AVAILABLE

Lists available parts for MV-3 controls used with Berkeley Jet drives.

Teleflex Marine MV-3 Series Specifications

General

Type	Mechanical Valve
Series	MV-3
Application	Marine
Cable Travel	3" (76 mm)
Connection Type	Threaded